Monday, August 6, 2007

Block diagram (till I can scan the paper copy)

The data acquisition of a band-limited signal has the following broad steps:


  1. DC removal


  2. 2-bit ADC (0.5 MHz speed)


  3. Collect 4 such samples at one time (for simplicity, copy the same signals 4 times)



  4. Build a sampler, of 0.5 MHz.


  5. One could take 10 MHz signal, and use every 20th pulse (simple counter) for sampling.



  6. Put together four 2-bit samples on a bus with an isolator for i/o.


  7. Feed the signal to the data acquisition card sitting in the PCI slot of a PC.

No comments: